Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Flushing Homeowners Choose Lennox Air Duct Cleaning
We provide independent Lennox air duct cleaning and service in Flushing, NY, for owners of the Dave Lennox Signature Collection, Merit Series, Elite Series and the CBX air handlers those systems run on. What makes our Lennox work different is that we judge the system on airflow, static pressure and coil condition, not on a brand badge – then clean to the standard the equipment actually needs. We’re an independent service provider and are not affiliated with, authorized by or endorsed by Lennox. Our technicians have up to 12 years of experience. Call (833) 468-5745. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Air Duct Cleaning Flushing for Your Lennox Air Duct Cleaning?
Lennox equipment has its own habits, and they show up long before anything fails outright. The CBX27UH and CBX40UHV air handlers mount the evaporator coil in a cabinet that traps dust on the coil face, the high-efficiency furnaces route flue gases through a secondary heat exchanger with finned surfaces that collect lint, and the plenum collars feed flex runs that can sag or separate at the takeoff. We know those spots because they’re where Lennox systems lose airflow first.
Our technicians have up to 12 years of experience across these systems, and they work from measurements rather than guesswork: static pressure readings, coil condition, blower cleanliness, and airflow at the registers. When a part is needed, we use quality parts that fit Lennox equipment – OEM coils, blower assemblies and filter racks where fit and refrigerant-circuit integrity matter, quality aftermarket flex duct, mastic and insulation where they don’t. We’re not a Lennox dealer and we don’t claim factory certification. Every job is done so the work doesn’t interfere with your existing Lennox warranty, and we don’t touch sealed refrigerant circuits unless the job calls for it.
We name the tools we use – Rotobrush, Nikro, Abatement Technologies – because transparency is part of the job. Ask us what equipment we’re bringing. We’ll tell you exactly. Call (833) 468-5745 for a free estimate.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Fix in Flushing
- Evaporator coils matted with dust in CBX air handlers. The cabinet-mounted coil in a Lennox air handler wicks condensate and traps dust on the fin face. When that film builds, airflow chokes and the coil face can frost over during a long summer run. Cleaning the fins and the drain pan restores the coil’s ability to move air and shed water.
- Secondary heat exchanger fins loaded with lint and dust. Lennox high-efficiency furnaces pass flue gases over finned surfaces inside the secondary heat exchanger. Dust and lint collect there, static pressure climbs, and pressure switches can trip and shut the furnace down. We inspect and clean around that exchanger as part of full system cleaning.
- Flex duct that sags, kinks or separates at the plenum collar. Flexible runs coming off a Lennox plenum are prone to sagging, kinking and pulling away at the takeoff. A separated takeoff starves the far rooms. We pressure-test the runs, then seal the collar and any joints with mastic.
- Blower wheels imbalanced by pet hair and construction dust. Return-air filter grilles on Lennox air handlers load up with hair and jobsite dust, and the blower wheel pulls in what the filter lets past. A loaded wheel goes off-balance, drops CFM and gets noisy. We pull the blower and clean the wheel as part of the service.
- Return filter grilles that don’t seal. A filter grille that doesn’t sit tight lets unfiltered air straight into the return. That’s a common reason a Lennox system that was cleaned before gets dirty again fast. We check and seal the grille as part of the job.
Lennox Parts & Our Repair-vs-Replace Approach
Down here, cooking is done daily and at high volume. In Flushing’s dense, multi-generational households – especially Chinese and Korean families – interior ductwork gets coated with a persistent film of aerosolized cooking oil and grease that standard residential cleaning rarely encounters. That grease layer traps dust, mold spores and odor. So the defining skill for Lennox duct work in this neighborhood is restaurant-grade degreasing, not a grid-and-vacuum pass. When grease sits on a Lennox coil face or a blower wheel, the airflow loss follows.
On parts, we use Lennox OEM coils, blower assemblies and filter racks where fit and refrigerant-circuit integrity matter, and quality aftermarket flex duct, mastic and insulation where they don’t. We don’t stock OEM parts on any truck and we’re not a Lennox dealer – we source what fits your equipment. On repair versus replace: on a Lennox cabinet and coil under 12 to 15 years old with a sound heat exchanger, repair is usually the right call. Replacement makes sense when the heat exchanger or coil has failed and the cabinet is already at end of life. Call (833) 468-5745 for a free estimate on your Lennox system.
Our Lennox Service Process – Step by Step
- 1
Diagnose. We measure static pressure, check the coil face and blower for grease and dust, and test airflow room by room. On Lennox equipment we also check the plenum collars, the return filter grille seal and, on high-efficiency furnaces, the secondary heat exchanger area.
- 2
Clean and repair. With the system isolated, we use Rotobrush rotary brush systems and Nikro cleaning rigs to work the duct runs and coils, and Abatement Technologies air scrubbers with containment to capture what gets dislodged. Where takeoffs are separated we seal them with mastic; where flex is beyond saving we replace it with quality aftermarket duct sized to the run.
- 3
Filtration. Where it helps, we supply and install Honeywell and Aprilaire filtration products to keep the Lennox system cleaner between cleanings, and finish duct surfaces with Guardsman protective products.
- 4
Test. We re-check static pressure and airflow at the registers after the work, and confirm the blower and coil are clean and dry.
- 5
Warranty-safe handoff. We document the work and make sure nothing we did interferes with your Lennox warranty.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Flushing
We service ducted Lennox equipment across the Dave Lennox Signature Collection, including the SL280V, SLP98V and XC25; the Merit Series, including the ML180, ML193 and XC13; the Elite Series, including the EL296V and XP16; and the CBX27UH and CBX40UHV air handlers those systems run on. In practice that means Lennox high-efficiency furnaces with secondary heat exchangers, Lennox air handlers with cabinet-mounted coils and blowers, and the duct systems connected to them. We clean, seal and service these systems and install quality parts that fit Lennox equipment. We’re independent and not authorized by Lennox.
We Also Service These Brands
We work on Trane and Carrier equipment too, so a Flushing home that has mixed brands under one roof doesn’t need two calls. The same process applies: measure the system, clean the ducts and coils to the equipment’s needs, seal what’s leaking and verify airflow at the registers. If your Lennox system shares ductwork with a Trane or Carrier air handler in another unit, we can trace and isolate the run so each system gets what it needs.
FAQs – Lennox Air Duct Cleaning Service in Flushing
No. We are an independent service provider and are not affiliated with, authorized by or endorsed by Lennox. We diagnose, clean and service Lennox ducted systems, but we don’t represent the manufacturer and don’t claim factory certification. If you want factory-authorized service for a warranty claim, contact Lennox directly; if you want an independent local pro to clean and seal the ducts and service the coil and blower, call (833) 468-5745 for a free estimate.
Yes. We use Lennox OEM coils, blower assemblies and filter racks where fit and refrigerant-circuit integrity matter, and quality aftermarket flex duct, mastic and insulation for duct repairs. We don’t stock OEM parts on a truck and we’re not a Lennox dealer; we source what fits your system. Call (833) 468-5745 for a free estimate.
Most Lennox duct and coil cleanings are a scheduled job that’s done in a single visit, with the time depending on how many runs, how many units share the system and how much grease and dust has built up. We measure airflow and static pressure before and after, and we don’t promise same-day service. Call (833) 468-5745 for a free estimate and a scheduling window.
We cover ducted Lennox equipment: the Dave Lennox Signature Collection (SL280V, SLP98V, XC25), the Merit Series (ML180, ML193, XC13), the Elite Series (EL296V, XP16) and the CBX27UH and CBX40UHV air handlers. That includes cleaning and sealing the ducts, cleaning the evaporator coil and blower, and servicing the secondary heat exchanger area. Call (833) 468-5745 for a free estimate.
No, a duct cleaning and coil cleaning done correctly shouldn’t void your Lennox warranty. We work so the equipment and sealed circuits are left as we found them, and we don’t drill or cut into a Lennox cabinet or coil in a way that would compromise it. If you have a specific warranty question, check with Lennox, and call (833) 468-5745 for a free estimate on the service.
Lennox air duct cleaning in Flushing is priced per system, on a written estimate, not per vent and not by a coupon figure – the estimate sets the final price. The cost depends on how many duct runs you have, how many units share the ductwork in your converted multi-family home, and how much grease and dust has built up. Call (833) 468-5745 for a free estimate.
Yes, to a point. The cabinet-mounted evaporator coil in a Lennox air handler has a finned face that pulls dust out of the airstream, and in a Flushing home with daily, high-volume cooking that face loads faster than the ducts themselves. If you can’t remember the last time the coil was cleaned, get it looked at. Call (833) 468-5745 for a free estimate.
We can inspect and clean around the secondary heat exchanger area as part of full system cleaning, but a failed exchanger isn’t a cleaning job – it’s a repair or replacement decision. We check for dust and lint buildup that raises static pressure and trips pressure switches. Call (833) 468-5745 for a free estimate and we’ll tell you what we find.
No, sealing the ducts with mastic and quality aftermarket materials shouldn’t affect your Lennox warranty. We don’t seal in a way that changes the equipment itself, and we test static pressure afterward. If you’re unsure, check with Lennox, and call (833) 468-5745 for a free estimate.
The return-air filter grille on a Lennox air handler doesn’t always seal tight, and in a Flushing household with daily, high-volume cooking, pet hair and the dust from converted multi-family layouts, the blower wheel loads up fast. A dirty wheel goes off-balance and drops airflow. Call (833) 468-5745 for a free estimate.
Sometimes it can be cleaned, sometimes it needs replacement. Flex runs off a Lennox plenum that are sagging, kinked or separated at the takeoff usually need replacement with quality aftermarket duct sized to the run. Runs that are intact can often be cleaned. Call (833) 468-5745 for a free estimate and we’ll tell you which case you’re in.
Book Your Lennox Service in Flushing, NY
Book independent Lennox air duct cleaning, evaporator coil cleaning, full system cleaning or duct sealing in Flushing, NY. We judge your Lennox system on airflow, static pressure and coil condition, not on the badge on the cabinet. Call (833) 468-5745 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Flushing.